Auto Mag Grips
Printed From: AMT Guns information
Category: Auto Mag Pistol
Forum Name: Photo's
Forum Description: If you have a photo of your collection please post it on this forum so we can all enjoy them.
URL: http://www.amtguns.info/forum_posts.asp?TID=430
Printed Date: 27 Mar 2026 at 4:35am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Auto Mag Grips
Posted By: usrguns
Subject: Auto Mag Grips
Date Posted: 10 Jun 2009 at 3:07am
Gentlemen, within the next week or two we should have a source for some Auto Mag grips. The price is going to be about $125.00 but not for sure. Could vary due to materials. Attached is a pair of micarta turquoise/black that I will take a picture of them on my gun as soon as I recieve them. Hope you like them!!!!!!!!!!
 |
Replies:
Posted By: AUTOMAG
Date Posted: 10 Jun 2009 at 3:25am
|
They look pretty nice!! Who will be making them? Too rich for me right now, just had to put a new injector in my Duramax diesel to the tune of $1127.64, OUCH!!!!!
------------- "This is the 44 Magnum Auto Mag and holds a 300 grain cartridge and if properly used it can remove the fingerprints"!!! |
Posted By: usrguns
Date Posted: 29 Jun 2009 at 10:26pm
OK Grips finally came in and are on the Gun Pictures attached. You Can get the grips from RAASCO Grips e-mail is http://www.raascogrips.com - www.raascogrips.com . Owner is Alan Schlintz. Wonderful man to do business with. I am sending him my Automag III grips for him to see what he can do will follow up with all when I get some info. Hope you like the pics.
 |
Posted By: usrguns
Date Posted: 29 Jun 2009 at 10:31pm
OK grips finally came in and are on the gun. Picture's to follow. You can get the grips from Raasco grips. http://www.raascogrips.com - www.raascogrips.com . Owner Alan Schlintz. Wonderful man to do business with. I am sending him some Automag III grips to see what he can do, will let you all know. Hope you like the pics.
   |
Posted By: AUTOMAG
Date Posted: 29 Jun 2009 at 11:03pm
|
They look great!!! I have dealt with Alan many times on grips for my 1911 pistols and they are all top notch!! I may have to get with him on a set of the Dymondwood Camo grips if available!! This is what the Dymondwood Camo looks like in a 1911 grip!! Of course these are half checkered grips.  ------------- "This is the 44 Magnum Auto Mag and holds a 300 grain cartridge and if properly used it can remove the fingerprints"!!! |
Posted By: usrguns
Date Posted: 30 Jun 2009 at 6:59pm
| I like the Dymondwood but my next 2 sets will be in Purple Heart and Bubinga, I have both these on hand and am getting ready to send them to Alan. I was going to have them done in quilted sapeele but the peice I have is not big enough. Will keep looking though. |
Posted By: watchin
Date Posted: 07 Aug 2009 at 1:21am
|
Great grips. Those are $125? Not bad at all. Micarta should be pretty tough material.
-watchin-
|
Posted By: Pontiaker
Date Posted: 24 Aug 2009 at 7:08am
|
Grips look great! Iam a custom knifemaker and use ALOT of Micarta and G10 and to tell you the truth those look like G10 or G11 not Micarta? Can you double check and see what material they were made from? I dont think he is trying to pass anything over on anyone, they are very close to the same thing to most people but they both have just a hair different grain structure depending on what the material is made with. To tell you the truth the G10 is probably stronger too which comes into play with our AM's!
Matt
|
Posted By: Pontiaker
Date Posted: 24 Aug 2009 at 7:11am
| As far as the price I was also going to start making these on a Hass Mini Mill CNC mill and thats about the same price point we came up with if not a little higher. You just cant make them at the quality level we want and still make a couple bucks off them to make them worth making. $125 is pretty fair..... |