44 Auto Mag Parts
Printed From: AMT Guns information
Category: Auto Mag Pistol
Forum Name: Message Board
Forum Description: Message Board
URL: http://www.amtguns.info/forum_posts.asp?TID=2856
Printed Date: 26 Mar 2026 at 11:28pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: 44 Auto Mag Parts
Posted By: TomT
Subject: 44 Auto Mag Parts
Date Posted: 06 Sep 2023 at 12:38am
|
I'm looking for a 44 Auto Mag bolt rotation pin. Mine is broken and I need a replacement. If anyone has one that they are willing to sell please contact me, it would be a great. Thanks |
Replies:
Posted By: jw4570
Date Posted: 15 Sep 2023 at 8:46pm
|
I looked through my stuff and I don't see where I even have a spare (thought I did..) Have you contacted the new Automag Company? They had some parts for older guns. They might have one and I know they are hard to get a hold of, but worth the try. Lastly, you need to figure out why the pin broke. It sounds like it might have fired out of battery? Is the bolt damaged, ie cracked behind the lugs? It can be hard to see. Is the frame ring bent or cracked from the frame? I had these pictures from some time ago, I'm not sure if they are mine or ones I got from someone else. I had bought a bolt one time and I got it and showed damage (I don't think this was it but it sure looks like my workbench under there) and it was hairline cracks. I asked the seller if it was from a damaged gun and they said yes. They took it back (decent person) as they didn't realize the bolt was damaged too. It was out of battery that bent the frame ring and damaged the bolt. Bad news. I just don't want to see someone get hurt if they haven't throughly looked the gun over. I would order new recoil springs from Wolff (order a few sets) for whatever size rods you have once you have determined everything is ok. Good luck on your parts quest! Jason   |
Posted By: TomT
Date Posted: 16 Sep 2023 at 2:38pm
|
Hi Jason, Thank you for your reply regarding the broken bolt rotation pin. I recently purchased the gun and only discovered the broken pin when disassembling the bolt to install a titanium firing pin. The gun looks perfect in every other way. You have me thinking and I am going to reaily give it a close examination and dye check the bolt and frame for cracks. I will also check the headspace of the cartridges and lock up clearance. In regards to the Auto Mag Corp. In S.C. they said the bolt rotation pin is the same in the new firearm and they are using all the current inventory of parts for their new guns and when a shipment of pins comes in they may be able to get me one. The search continues. Thanks again |
Posted By: Rockrand
Date Posted: 15 Feb 2026 at 11:20pm
|
Scary for sure my Pasadena is perfect and I am scared to shoot it . I don’t understand why the new auto mag co just does not get more parts made if they fit older auto mags,make some money. I am sorry for you trouble such a cool gun always wanted one as a kid now I have one I have only fired it a few times.
|