44 Automag frontsight.
Printed From: AMT Guns information
Category: Auto Mag Pistol
Forum Name: Message Board
Forum Description: Message Board
URL: http://www.amtguns.info/forum_posts.asp?TID=17
Printed Date: 27 Mar 2026 at 1:10am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: 44 Automag frontsight.
Posted By: Luc V.
Subject: 44 Automag frontsight.
Date Posted: 10 Mar 2008 at 8:29pm
|
My 44 automag has no insert in the frontsight (is all stainless steel colour), but there is a small section cut out for some inlay, which looks to be original.
Anyone know what the original material was to fill this up?
I can do many different colours but have to use the "plastic sheet stuff" as in the S&W models, and I should mill the section deeper and dovetailed. I don't realy like to to do this, so the reason of the question towards the original inserts.
 |
Replies:
Posted By: curmudgeon
Date Posted: 10 Mar 2008 at 9:25pm
|
Luc, there was no original insert. It was a stick'em piece of paper. If yours is notched it has to be after market. Should have been dovetailed when cut.
You can dovetail or I'd drill about 2-3 small holes in the cut and fill with a liquid type front sight insert. Your choice. I can't imagine a front sight notch that was not dovetailed. However little surprises me when it comes to amateur gunsmithing...
 Cheers |
Posted By: TC357MAX
Date Posted: 10 Mar 2008 at 11:38pm
|
Luc, I have two automags. The first 44 Pasadena has a .010" dp X .200" slot without the dovetails in the front sight. Looks original to me. Now, my second a TDE 357, is smooth without the slot. |
Posted By: Luc V.
Date Posted: 11 Mar 2008 at 9:30am
|
Thanks for the info. I must admit I made a mistake! The frontsight on the 44 automag has no cuts at all.
I was almost sure it was, because I 'm sure I have a pistol with a frontsight as discribed in my previous post. (I must check my inventory to see which one it is, damn, I must have to many guns;-)
Anyway, I was thinking on doing someting as with my 357 Sig:
  |